IPP-USB(8)

NAME
ipp-usb - Daemon for IPP over USB printer support

DESCRIPTION
ipp-usb daemon enables driver-less printing and scanning on USB-only AirPrint-compatible printers and MFPs.

It works by connecting to the device by USB using IPP-over-USB protocol, and exposing the device to the network, including DNS-SD (ZeroConf) advertising.

IPP printing, eSCL scanning and web console are fully supported.

SYNOPSIS

  Usage:
ipp-usb mode [options]

  Modes are:

standalone
    run forever, automatically discover IPP-over-USB devices and serve them all

udev
    like standalone, but exit when last IPP-over-USB device is disconnected

debug
    logs duplicated on console, -bg option is ignored

check
    check configuration and exit. It also prints a list of all connected devices

status
    print status of the running ipp-usb daemon, including information of all connected devices

  Options are

-bg run in background (ignored in debug mode)

NETWORKING
Essentially, ipp-usb makes printer or scanner accessible from the network, converting network-side HTTP operations to the USB operations.

By default, ipp-usb exposes device only to the loopback interface, using the localhost address (both 127.0.0.1 and ::1, for IPv4 and IPv6, respectively). TCP ports are allocated automatically, and allocation is persisted in the association with the particular device, so the next time the device is plugged on, it will get the same port. The default port range for TCP ports allocation is 60000-65535.

This default behavior can be changed, using configuration file. See CONFIGURATION section below for details.

If you decide to publish your device to the real network, the following things should be taken into consideration:

1.  Your private device will become public and it will become accessible by other computers from the network

2.  Firewall rules needs to be updated appropriately. The ipp-usb daemon will not do it automatically by itself

3.  IPP over USB specification explicitly require that the Host field in the HTTP request is set to localhost or localhost:port. If device is accessed from the real network, Host header will reflect the real network address. Most of devices allow it, but some are more restrictive and will not work in this configuration.

DNS-SD (AVAHI INTEGRATION)
IPP over USB is intended to be used with the automatic device discovery, and for this purpose ipp-usb advertises all devices it handles, using DNS-SD protocol. On Linux, DNS-SD is handled with a help of Avahi daemon.

DNS-SD advertising can be disabled via configuration file. Also, if Avahi is not installed or not running, ipp-usb will still work correctly, although DNS-SD advertising will not work.

For every device the following services will be advertised:
Instance | Type | Subtypes
Device name | _ipp._tcp | _universal._sub._ipp._tcp
Device name | _printer._tcp |
Device name | _uscan._tcp |
Device name | _http._tcp |
BBPP | _ipp-usb._tcp |

Notes:

•   Device name is the name under which device appears in the list of available devices, for example, in the printing dialog (it is DNS-SD device name, in another words), and for most of devices will match the device's model name. It is appended with the " (USB)" suffix, so if device is connected via network and via USB simultaneously, these two connections can be easily distinguished. If there are two devices with the same name connected simultaneously, the suffix becomes " (USB NNN)", with NNN number unique for each device, for disambiguation. In another words, the single "Kyocera ECOSYS M2040dn" device will be listed as "Kyocera ECOSYS M2040dn (USB)", and two such a devices will be listed as "Kyocera ECOSYS M2040dn (USB 1)" and "Kyocera ECOSYS M2040dn (USB 2)"

•   _ipp._tcp and _printer._tcp are only advertises for printer devices and MFPs

•   _uscan._tcp is only advertised for scanner devices and MFPs

•   for the _ipp._tcp service, the _universal._sub._ipp._tcp subtype is also advertised for iOS compatibility

•   _printer._tcp is advertised with TCP port set to 0. Other services are advertised with the actual port number

•   _http._tcp is device web-console. It is always advertises in assumption it is always exist

•   BBPP, used for the _ipp-usb._tcp service, is the USB bus (BB) and port (PP) numbers in hex. The purpose of this advertising is to help CUPS and other possible "clients" to guess which devices are handled by the ipp-usb service, to avoid possible conflicts with the legacy USB drivers.

Matching DNS-SD announcements against local USB bus
Client software may need to match local devices exposed by ipp-usb with those found on the local USB bus. This can be useful, for example, to avoid offering USB devices in the print or scan dialog that cannot be used because they are already in use by ipp-usb.

As a rough guideline, clients might consider USB devices that offer interfaces with Class=7, SubClass=1, and Protocol=4 as belonging to ipp-usb. However, this is not a precise method. Some devices may not properly implement the IPP over USB protocol and could be blacklisted in the ipp-usb configuration for this reason. Additionally, some devices may be automatically recognized by ipp-usb as incompatible and thus skipped. It's also possible that ipp-usb is disabled on the system entirely.

A more reliable approach is to directly query the running ipp-usb instance to determine which devices it actually handles.

To facilitate the matching of devices that ipp-usb manages and announces via DNS-SD against local devices found on the USB bus, ipp-usb adds two TXT records to each _ipp._tcp, _printer._tcp, and _uscan._tcp services it announces:

•   usb_SER=VCF9192281 - USB serial number for the device

•   usb_HWID=0482&069d - USB vendor and hardware ID for the device in hex

Please note that when matching devices discovered via DNS-SD with USB devices, it is important to only consider DNS-SD advertisements from IP addresses that are either loopback addresses (127.0.0.1 or ::1) or belong to a local interface.

CONFIGURATION
ipp-usb searched for its configuration file in two places:

1.  /etc/ipp-usb/ipp-usb.conf

2.  ipp-usb.conf in the directory where executable file is located

Configuration file syntax is very similar to .INI files syntax. It consist of named sections, and each section contains a set of named variables. Comments are started from # or ; characters and continues until end of line:

    # This is a comment
    [section 1]
    variable 1 = value 1  ; and another comment
    variable 2 = value 2

  Network parameters
Network parameters are all in the [network] section:

    [network]
      # TCP ports for HTTP will be automatically allocated in the
      # following range
      http-min-port = 60000
      http-max-port = 65535
      # Enable or disable DNS-SD advertisement
      dns-sd = enable      # enable | disable
      # Network interface to use. Set to `all` if you want to expose you
      # printer to the local network. This way you can share your printer
      # with other computers in the network, as well as with iOS and
      # Android devices.
      interface = loopback # all | loopback
      # Enable or disable IPv6
      ipv6 = enable        # enable | disable

  Authentication
By default, ipp-usb exposes locally connected USB printer to all users of the system.

Though this is reasonable behavior in most cases, when computer and printer are both in personal use, for bigger installation this approach can be too simple and primitive.

ipp-usb provides a mechanism, which allows to control local clients access based on UID the client program runs under.

Please note, this mechanism will not work for remote connections (disabled by default but supported). Authentication of remote users requires some different mechanism, which is under consideration but is not yet implemented.

Note also, this mechanism may or may not work in containerized installation (i.e., snap, flatpak and similar). The container namespace may be isolated from the system and/or user's namespaces, so even for local clients the UID as seen by the ipp-usb may be different from the system-wide UID.

Authentication parameters are all in the [auth uid] section:

    # Local user authentication by UID/GID
    [auth uid]
      # Syntax:
      #     operations = users
      #
      # Operations are comma-separated list of following operations:
      #     all    - all operations
      #     config - configuration web-console
      #     fax    - faxing
      #     print  - printing
      #     scan   - scanning
      #
      # Users have the following suntax:
      #     user   - user name
      #     @group - all users that belongs to the group
      #
      # Users and groups may be specified either by names or by
      # numbers. "*" means any
      #
      # Note, if user/group is not known in the context of request
      # (for example, in the case of non-local network connection),
      # "*" used for matching, which will only match wildcard
      # rules.
      #
      # User/group names are resolved at the moment of request
      # processing (and cached for a couple of seconds), so running
      # daemon will see changes to the /etc/passwd and /etc/group
      #
      # Examples:
      #     fax, print = lp, @lp   # Allow CUPS to do its work
      #     scan       = *         # Allow any user to scan
      #     config     = @wheel    # Only wheel group members can do that
      all = *

  Logging configuration
Logging parameters are all in the [logging] section:

    [logging]
      # device-log  - what logs are generated per device
      # main-log    - what common logs are generated
      # console-log - what of generated logs goes to console
      #
      # parameter contains a comma-separated list of
      # the following keywords:
      #   error     - error messages
      #   info      - informative messages
      #   debug     - debug messages
      #   trace-ipp, trace-escl, trace-http - very detailed
      #               per-protocol traces
      #   trace-usb - hex dump of all USB traffic
      #   all       - all logs
      #   trace-all - alias to all
      #
      # Note, trace-* implies debug, debug implies info, info implies
      # error
      device-log    = all
      main-log      = debug
      console-log   = debug
      # Log rotation parameters:
      #   log-file-size    - max log file before rotation. Use suffix
      #                      M for megabytes or K for kilobytes
      #   log-backup-files - how many backup files to preserve during
      #                      rotation
      #
      max-file-size    = 256K
      max-backup-files = 5
      # Enable or disable ANSI colors on console
      console-color = enable # enable | disable
      # ipp-usb queries IPP printer attributes at the initialization time
      # for its own purposes and writes received attributes to the log.
      # By default, only necessary attributes are requested from device.
      #
      # If this parameter is set to true, all printer attributes will
      # be requested. Normally, it only affects the logging. However,
      # some enterprise-level HP printers returns such huge amount of
      # data and do it so slowly, so it can cause initialization timeout.
      # This is why this feature is not enabled by default
      get-all-printer-attrs = false # false | true

  Quirks
Some devices, due to their firmware bugs, require special handling, called device-specific quirks. ipp-usb loads quirks from the /usr/share/ipp-usb/quirks/*.conf files and from the /etc/ipp-usb/quirks/*.conf files. The /etc/ipp-usb/quirks directory is for system quirks overrides or admin changes. These files have .INI-file syntax with the content that looks like this:

    [HP LaserJet MFP M28-M31]
      http-connection = keep-alive
    [HP OfficeJet Pro 8730]
      http-connection = close
    [HP Inc. HP Laser MFP 135a]
      blacklist = true
    # Default configuration
    [*]
      http-connection = ""

For each discovered device, its model name is matched against sections of the quirks files. Section names may contain glob-style wildcards: * that matches any sequence of characters and ? , that matches any single character. To match one of these characters (* and ?) literally, use backslash as escape.

Note, the simplest way to guess the exact model name for the particular device is to use ipp-usb check command, which prints a list of all connected devices.

All matching sections from all quirks files are taken in consideration, and applied in priority order. Priority is computed using the following algorithm:

•   When matching model name against section name, amount of non-wildcard matched characters is counted, and the longer match wins

•   Otherwise, section loaded first wins. Files are loaded in alphabetical order, sections read sequentially

If some parameter exist in multiple sections, used its value from the most priority section

The following parameters are defined:

•   blacklist = true | false
    If true, the matching device is ignored by the ipp-usb

•   buggy-ipp-responses = reject | allow | sanitize
    Some devices send buggy (malformed) IPP responses that violate IPP specification. ipp-usb may reject these responses (so ipp-usb initialization will fail), allow them (ipp-usb initialization will succeed, but CUPS needs to accept them as well) or sanitize them (fix IPP specs violations).

•   disable-fax = true | false
    If true, the matching device's fax capability is ignored.

•   http-XXX = YYY
    Set XXX header of the HTTP requests forwarded to device to YYY. If YYY is empty string, XXX header is removed.

•   ignore-ipp-status = true | false
    If true, IPP status of IPP requests sent by the ipp-usb by itself will be ignored. This quirk is useful, when device correctly handles IPP request but returned status is not reliable. Affects only ipp-usb initialization.

•   init-delay = DELAY
    Delay, between device is opened and, optionally, reset, and the first request is sent to device.

•   init-retry-partial = true | false
    Retry the initialization in case only part of the device's functions have been initialized, instead of continuing to operate with incomplete functionality.

    It can be useful if the device takes a long time to fully initialize. During this period, some components may respond normally while others are still initializing. For example, the device may quickly report its scanning capabilities shortly after startup, while its printing functionality may take several minutes to become operational.

    Some enterprise-level HP printers are known to have this problem.

•   init-reset = none | soft | hard
    How to reset device during initialization. Default is none

•   init-timeout = DELAY
    Timeout for HTTP requests send by the ipp-usb during initialization.

•   request-delay = DELAY
    Delay between subsequent requests.

•   usb-max-interfaces = N
    Don't use more that N USB interfaces, even if more is available.

•   zlp-recv-hack = true | false
    Some enterprise-level HP devices, during the initialization phase (which can last several minutes), may respond with an HTTP 503 status or similar, which is expected. However, the response body may be truncated (typically, the terminating '\n' is lost). In such cases, ipp-usb will wait indefinitely for a response to maintain synchronization with the device.

    At the same time, these devices send a zero-length UDP packet at the end of the truncated output. If the zlp-recv-hack quirk is enabled, when ipp-usb receives a zero-length packet from the USB followed by a receive timeout, it interprets this combination of events as a valid termination of the response body. It works only at the initialization time and doesn't affect futher operations.

•   zlp-send = true | false
    Terminate outgoing transfers that a multiple of the endpoint's packet size win an extra zero length packet.

The DELAY parameter can be specified either as an unsigned integer (in milliseconds) or as a sequence of decimal numbers with an optional fraction and a unit suffix, such as "300ms," "0.5s," or "2m30s." Valid time units are "ns," "us" (or "µs"), "ms" "s" "m" and "h"

If you found out about your device that it needs a quirk to work properly or it does not work with ipp-usb at all, although it provides IPP-over-USB interface, please report the issue at https://github.com/OpenPrinting/ipp-usb. It will let us to update our collection of quirks, so helping other owners of such a device.

FILES

•   /etc/ipp-usb/ipp-usb.conf: the daemon configuration file

•   /var/log/ipp-usb/main.log: the main log file

•   /var/log/ipp-usb/<DEVICE>.log: per-device log files

•   /var/ipp-usb/dev/<DEVICE>.state: device state (HTTP port allocation, DNS-SD name)

•   /var/ipp-usb/lock/ipp-usb.lock: lock file, that helps to prevent multiple copies of daemon to run simultaneously

•   /var/ipp-usb/ctrl: ipp-usb control socket. Currently only used to obtain the per-device status (printed by ipp-usb status), but its functionality may be extended in a future

•   /usr/share/ipp-usb/quirks/*.conf: device-specific quirks (see above)

•   /etc/ipp-usb/quirks/*.conf: device-specific quirks defined by sysadmin (see above)

COPYRIGHT
Copyright (c) by Alexander Pevzner (pzz@apevzner.com, pzz@pzz.msk.ru)
All rights reserved.

This program is licensed under 2-Clause BSD license. See LICENSE file for details.

SEE ALSO
cups(1)